http://schema.org/InStock
Brand: Morrison Bros
Availability: In Stock
Weight: 7.27kg

Normally closed solenoid valves are used to help prevent the accidental siphoning of product from a tank in the event of a fracture in the pipe or other cause for leak downstream and below the liquid level.  Generally installed on the dispensing side of a fuel system pipeline. The valve opens upon the receipt of an electronic signal such as when a dispenser or pump is switched to the on position.

Standard Features

Normally closed, hung piston design

Install in a horizontal pipeline in the upright vertical position

Zero pressure differential 

Integral thermal relief allows the valve to relieve expansion pressure in the opposite direction of flow

Continuous duty Class H standard coil operates at 120 volts

Enclosure is watertight and rated for hazardous locations—NEMA 3, 4X, 7 and 9; groups C and D

Several optional coil voltages available

710MO has manual override feature. Available in sizes ranging from ¾″ to 2″ for operation during a power outage

Recommended for use with liquids having a maximum viscosity of 60 centistokes

A strainer with a 100 mesh screen is recommended at the valve inlet

Construction Details

  • Body: Cast bronze
  • Seals: Viton®, Teflon
  • Solenoid housed in an integral, watertight, explosion-proof shell

Houston

13895 Westfair East Drive
Houston, TX 77041
281.664.7444 - Office
281.664.7445 - Fax

Dallas

3312 Towerwood
Farmers Branch, TX 75234
214.357.1934 - Office
214.357.5001 - Fax

San Marcos

5040 SH 123 BLDG 300
San Marcos, TX 78666
830.608.9800 - Office
830.608.9804 - Fax