PetroClear 405 W Series 3/4" 30 Micron Spin-On Fuel Dispenser Filter

Spin-On Fuel Dispenser Filter for Particulate Removing & Water Sensing

For Fuel Dispensers Water Sensing in Neat Gasoline and Diesels

PETROCLEAR FILTERS ARE NOT TO BE USED IN AVIATION FUEL APPLICATIONS

Benefits

PetroClear models 40510W and 40530W are particulate removing and water sensing spin-on filters designed to remove particulate and to sense both free and emulsified water from gasoline, diesel, Biodiesel, ULSD (Ultra Low Sulfur Diesel), Kerosene and fuel oils.

PetroClear models 40510W and 40530W are particulate removing and water sensing spin-on filters. These filters are designed to sense water, both free and emulsified, and slow flow as an indicator of the presence of water in NEAT GASOLINE and diesel fuels. THIS FILTER WILL NOT SENSE NOR REACT TO WATER IN ETHANOL BLENDED GASOLINE. (REACTION KNOWN AS PHASE SEPARATION).

PetroClear model 40510W filter offers efficient 10 micron nominal particulate removal (nominal = 75% efficiency) and senses both free and emulsified water in NEAT GASOLINE and diesel fuels.

PetroClear model 40530W filter offers efficient 30 micron nominal particulate removal (nominal = 75% efficiency) and senses both free and emulsified water in NEAT GASOLINE and diesel fuels.

UL recognized for NEAT GASOLINE and diesel fuels.

Will not detect or react to phase separation in Ethanol blended fuels.

Compatible with Biodiesel fuels.

The water-sensing filter is not a fool-proof mechanical positive shut-off. If this filter remains in service after going into slow flow it can return to full flow, allowing contaminated fuel to be dispensed into the consumer's vehicle and cause potential damage.

Specifications

The PetroClear model 40510W utilizes a 10 micron cellulose media to remove particulate from gasolines and diesel fuels including Biodiesel and ULSD (Ultra Low Sulfur Diesel). Removes a minimum of 75% of particulate 10 micron in size (and approximately 100% of larger particulate). This filter utilizes a super-absorbent chemical that is laminated to the filter media for water sensing capabilities in neat gasoline and diesel applications.

The PetroClear model 40530W utilizes a 30 micron cellulose media to remove particulate from gasolines and diesel fuels including Biodiesel and ULSD (Ultra Low Sulfur Diesel). Removes a minimum of 75% of particulate 30 micron in size (and approximately 100% of larger particulate). This filter utilizes a super-absorbent chemical that is laminated to the filter media for water sensing capabilities in neat gasoline and diesel applications.

Once PetroClear models 40510W and 40530W have absorbed 5.9 ounces (175 mil) of water from neat gasoline or diesel fuel, flow will be noticeably slow.

The maximum flow rate for PetroClear models 40510W and 40530W is 20 gpm (76 lpm). Maximum operating pressure is 50 psid (3.4 bar). Maximum differential pressure is 25 psid (1.7 bar). Collapse pressure is 150 psid (10.3 bar). Maximum operating temperature is 250F (139C).

PetroClear models 40510W and 40530W utilize a standard 1"-12 UNF mounting thread ref. (3/4" flow) required for most spin-on filter adaptors used in aftermarket.

PetroClear models 40510W and 40530W utilize an epoxy coated interior shell to eliminate oxidation (rusting), which can cause pinhole leaks from the inside of the filter shell.

Adaptors are available for models 40510W and 40530W in aluminum and cast iron. These single adaptors are available in both 3/4" and 1" NPT or BSP inlet/outlet threads.